China 32mm 24 Volt 10W 20W DC Planetary Brushless Geared Motor motor electric

Merchandise Description

Brushless Motor Specs:

Motor Specification:
 

 Motor Model 32BLSE240630 32BLSE241230 32BLSE241830
 Rated Voltage(VDC) 24 24 24
 Rated Pace(Rpm) 3000 3000 3000
 Rated Torque(N.m) .02 .04 .06
 Rated Electrical power(W) 6 twelve eighteen
L1 Size(mm) fifty eight seventy eight ninety eight

*Notice: We can manufacture items according to customer’s needs. 

Gearbox Specificaiton: 
 

 Reducer Collection

1

two

three

4

  Transmission performance

 80%

70%

sixty%

fifty%

Max radial load

35N

35N

35N

35N

Max axial load

25N

25N

25N

25N

Transmission torque

.2N.m

.4N.m

.8N.m

1.2N.m

    Reduction Ratio

four

five

fourteen

27

35

fifty one

seventy one

100

189

516

L2   Length(mm)

twenty.6

27

33.four

39.8

*Observe: We can manufacture merchandise according to customer’s requirements.

Company Potential
 1. Creation line

2. Test equipment:

3. Certificates:

4 Exhibitions And Consumer Go to:

5. FAQ(Q=Concern, A=Response)

Q: What’s your principal merchandise?
A:We presently make Brushed Dc Motors, Brushed Dc equipment Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors and so on. You can check out the technical specs for above motors on our web site and you can e-mail us to advise essential motors for every your specification also.

Q:How to decide on a suitable motor?
A:If you have motor photos or drawings to present us, or you have comprehensive specs like voltage, pace, torque, motor size, operating manner of the motor, essential existence time and noise degree and so on, remember to do not be reluctant to let us know, then we can advise appropriate motor for every your request accordingly.

Q: Do you have custom-made provider for your common motors?
A:Indeed, we can customise for each your ask for for the voltage, pace, torque and shaft size/form. If you need added wires/cables soldered on the terminal or require to add connectors, or capacitors or EMC we can make it as well.

Q:Do you have person layout support for motors?
A:Sure, we would like to design and style motors individually for our customers, but it may need to have some CZPT charge and layout cost. 

Q:Can I have samples for screening initial?
A:Of course, absolutely you can. Soon after confirmed the needed motor specs, we will estimate and provide a proforma invoice for samples, once we get the payment, we will get a PASS from our account division to move forward samples accordingly.

Q:How do you make confident motor top quality?
A:We have our personal inspection methods: for incoming materials, we have signed sample and drawing to make confident certified incoming materials for production procedure, we have tour inspection in the method and final inspection to make sure competent products prior to transport.

Q:What’s your lead time?
A:Typically speaking, our typical normal product will need twenty five-30days, a bit lengthier for custom-made products. But we are extremely adaptable on the direct time, it will relies upon on the distinct orders

Q:What is actually your payment term?
A:For all our new consumers, we will need to have forty% deposite, sixty% paid ahead of shipment.

Q:When will you reply soon after obtained my inquiries?
A:We will response inside 24 hrs as soon as get your inquires.

Q:How can I trust you to make confident my cash is risk-free?
A:We are certified by the 3rd party SGS and we have exported to above 85 international locations up to June.2017. You can check our track record with our recent buyers in your region (if our buyers do not brain), or you can buy via alibaba to get trade assurance from alibaba to make sure your money is secure.

Q:What’s the minimal get amount?
A:Our minimum buy amount is dependent on distinct motor models, make sure you e-mail us to check. Also, we typically do not accept private use motor orders. 

Q:What is your shipping and delivery technique for motors?
A:For samples and packages less than 100kg, we generally suggest express delivery For weighty packages, we normally suggest air shipping and delivery or sea delivery. But it all is dependent on our customers’ wants.

Q:What certifications do you have?
A:We at the moment have CE and ROSH certifications.

Q:Can you ship me your value listing?
A:Considering that we have hundreds of various items, and price varies per various technical specs, we are not CZPT to offer you a price record. But we can quotation within 24 several hours when received your inquirues to make certain you can get the cost in time.

Q:Can I visit your firm?
A:Sure, welcome to pay a visit to our company, but please enable us know at minimum 2 months in advance to help us make positive no other meetings throughout the day you pay a visit to us. Many thanks!

Weclome get in touch with with us if have any queries about this motor or other goods!

Application: Universal
Operating Speed: Low Speed
Function: Driving
Casing Protection: Closed Type
Number of Poles: 8
Structure and Working Principle: Brushless

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

 Motor Model 32BLSE240630 32BLSE241230 32BLSE241830
 Rated Voltage(VDC) 24 24 24
 Rated Speed(Rpm) 3000 3000 3000
 Rated Torque(N.m) 0.02 0.04 0.06
 Rated Power(W) 6 12 18
L1 Length(mm) 58 78 98

###

 Reducer Series

1

2

3

4

  Transmission efficiency

 80%

70%

60%

50%

Max radial load

35N

35N

35N

35N

Max axial load

25N

25N

25N

25N

Transmission torque

0.2N.m

0.4N.m

0.8N.m

1.2N.m

    Reduction Ratio

4

5

14

27

35

51

71

100

189

516

L2   Length(mm)

20.6

27

33.4

39.8

Application: Universal
Operating Speed: Low Speed
Function: Driving
Casing Protection: Closed Type
Number of Poles: 8
Structure and Working Principle: Brushless

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

 Motor Model 32BLSE240630 32BLSE241230 32BLSE241830
 Rated Voltage(VDC) 24 24 24
 Rated Speed(Rpm) 3000 3000 3000
 Rated Torque(N.m) 0.02 0.04 0.06
 Rated Power(W) 6 12 18
L1 Length(mm) 58 78 98

###

 Reducer Series

1

2

3

4

  Transmission efficiency

 80%

70%

60%

50%

Max radial load

35N

35N

35N

35N

Max axial load

25N

25N

25N

25N

Transmission torque

0.2N.m

0.4N.m

0.8N.m

1.2N.m

    Reduction Ratio

4

5

14

27

35

51

71

100

189

516

L2   Length(mm)

20.6

27

33.4

39.8

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China 32mm 24 Volt 10W 20W DC Planetary Brushless Geared Motor     motor electric	China 32mm 24 Volt 10W 20W DC Planetary Brushless Geared Motor     motor electric
editor by czh 2023-01-20